Essco fittings for bathroom are the best in its category
If you are going for a bathroom makeover but don’t want to spend too much on fixtures and not compromise on the quality of products either, you should then consider Essco. As Essco fittings for bathroom are not only affordable but are also high quality stuff. It is the number one brand in the value-for money segment.
Why you should consider Essco products?
If you are buying fittings for bathroom, a bit of research in the marketplace will inform you that only branded products are to be trusted. Therefore, keep away from non-branded goods as most of them don’t offer warranties. They usually do not have replacement policies too. Being small, they have a limited range of products to choose from.
A reputed yet affordable brand:
You may find branded fittings for bathroom a tad expensive. But a closer look will reveal that there’s at least one reputed brand that offers a wide range of affordable high quality bathroom products. And that’s Essco. In fact it pioneered the concept of branded fittings for bathroom in India. It is a brand that can boast of true quality, and trusted service since 1960.
Essco’s Wide range of products:
You buy a brand because it saves decision-making time. This is possible because brands cater to the complete range of bathroom products you require. When you visit a market for purchasing fittings for your bathroom, you are overwhelmed by the options available of varying quality levels. It becomes difficult and confusing to choose from an abundance of choices. Visiting the stores of a few good brands rather can fulfil all your requirements in no time. You only have to decide on a brand and you get all the products under one roof, which will save time as well as the effort.
You may consider Essco as the faucets itself comprise of 6 ranges to suit various design needs, besides a complete range of faucets with single-lever, quarter turn and multi-turn operation. Although a full complement of a range of fittings for bathroom could consist of many fixtures but the essential items that people buy include a tap for wash basin, an overhead shower, a hand shower, a wall mixer, sanitarywares such as a wash basin and a toilet.
Taps for wash basin:
Taps for wash basin can either be mounted on the wall, into a countertop or on the sink itself. Your choice of basin will usually dictate the style of tap you can install. So within a range there could be three kinds of taps – wall-mounted style of tap, counter-top taps and simple pillar taps that are mounted on the basin itself. Therefore, it is important to go for a brand like Essco which can cater to your myriad requirements.
Although pillar taps are more popular as they are affordable and easy to fit on basins, you should know which style of tap goes with which kind of basin before purchasing one. A wall-mounted tap, as the name suggest are designed to be fitted to the wall. It is used ideally to save that space taken up by a counter-top tap or by a basin with tap holes for basin-top taps.
Usually a wall-mounted tap is teamed up with a counter-top basin that does not have tap holes. On the other hand, if you are choosing pillar taps, they are usually supplied as a pair – one controls the hot water while the other tap controls the cold water – then you will need to ensure your basin has two tap-holes.
Tall basin mixer taps are almost exclusively used with a countertop basin. This means that they are mounted to your worktop instead of the basin. As they only have one tap hole and one spout they look stylish and less cluttered.
If you are looking for a tap for wash basin in your bathroom, you should definitely give a serious thought to basin mixers. These faucets are much more versatile and useful than an ordinary tap. Traditional hot and cold pillar taps that draw water separately, limit you to two flows of water – hot and cold. Unlike them a basin mixer combines hot and cold water supplies, mixing them together, before pouring it out of a single spout at the desired temperature and water flow. This can be controlled either by a single lever or two handles.
Basin mixers have more sleek and contemporary looks compared to ordinary taps. Their handles can vary from traditional rotating cross-head that can lend elegance to an ornate bathroom to levers that can match the sleek lines of a modern bathroom.
Single lever basin mixers are cool and fun to operate. They are easy to control. Just with a flick of your finger you can turn it one way or the other to control the temperature or lift it up or down to control the flow. They have better economy too. They prevent too much water being consumed as basin mixer taps are generally fitted with a flow limiter.
Then there are other important factors you should consider before purchasing a tap for the wash basin. The tap should have high quality chrome plating and made of brass for durability and reliability.
Essco bathroom taps have high-quality chrome plating for durability and sparkling finish. They use 10 microns of Nickel and 0.3 microns of Chrome thickness for higher durability which is one of the best in class ratio. Quality and reliability are at par with Jaquar Group standards.
State-of-the-art manufacturing and R&D set-up
Essco taps have brass body that makes them more durable. Brass, as we all know is an alloy of copper and zinc, and is the most widely used material for manufacturing taps due to its resistance to soft-water corrosion and hard-water calcification. Essco taps are made to undergo a quality check for the chemical composition of brass for apt standard, maintaining quality according to world standards and withstand all kinds of corrosion arising out of hard water.
The cartridges of Essco taps undergo tests of five lakh cycles to ensure higher longevity.
Warranty and unmatched customer service:
Essco is a Jaquar Group company and offers its customers value-for-money branded products. Jaquar Group is the country’s leading bathroom brand and has almost 60 percent market share in the bathroom fixtures industry. By purchasing an Essco product you automatically get covered by 10 years warranty on the product. You then also enjoy the strength of Jaquar Group’s after-sales service. It has a dedicated workforce of 10,000 people spread across in 45+ countries. Essco’s customers therefore, can avail of a strong customer support across the country which very few brands of bathroom brands can even offer in the value-for-money segment.
High quality fittings for bathroom:
All Essco products are manufactured in India on the principles of Jaquar Group with respect to product quality & customer support in the value segment. It has one of Asia’s most advanced manufacturing setup built around over 3,29,000 sq. meters. Essco offers all your bathroom needs for affordable housing and value segment through its strong network of over 4000 dealers across the country.